Restoring Programmed Data; Local Update; Prerequisites For Ctx100 And Ctx670 Local Update - Toshiba Strata CTX Programming Manual

Digital business telephone systems
Hide thumbs Also See for Strata CTX:
Table of Contents

Advertisement

Maintenance

Restoring Programmed Data

Restoring Programmed Data
To restore data from a Backup performed onto SmartMedia, follow the directions below:
1. Insert the SmartMedia card that has the system's default.dat file (under the PROGDATA folder) into the
Strata CTX SmartMedia slot.
2. Run Program 900
steps below.
Restoring data takes anywhere from 10 minutes to one hour for completion, depending on the size of
the database (default.dat file).
3. When the programming telephone LCD becomes active, enter the programming mode and enter your
password.
Restore is complete if the system accepts the password and enables you to enter programming mode.

Local Update

The following procedures are required for both systems Local Update, i.e; Strata CTX100 and CTX670.

Prerequisites for CTX100 and CTX670 Local Update

The following are the prerequisites for Local Update:
• The SmartMedia card must be installed in the system with a Backup of the current database
(default.dat) file.
• Activation of the new software requires a Clear-reboot operation that will drop all existing calls and
will take the system out of service from 10 minutes to an hour or more, depending on the system size.
• Requires a different system software Update file (provided on the Toshiba FYI site), depending on the
type of CTX system and the type of Update that will be performed.
CTX Software Update Files
Each Strata CTX system type has two Software Update files: one for CTX WinAdmin Remote Update and
another file for Local Update (to use with the Programming Telephone procedure).
CAUTION!
CTX Software Identification
Refer to the table below to identify CTX software release and builds in software file names or when
verifying CTX software versions.
14-2
"System Initialize"
Using the wrong file in either case will cause the Update to fail.
CTX Release
R1.00 and R1.01
R1.02
R1.03
R1.3
R2.0
nn = Software build level/number
on
page
13-94, Level 1 (ALL DATA CLEAR). See programming
Software ID
= M01nn
= MA2nn
= MA3nn
= ME0nn
= MF0nn
Strata CTX Programming - Part 3:Telephone Button Programming 04/03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata ctx100Strata ctx670

Table of Contents