Ctx Smartmedia Folders - Toshiba Strata CTX Programming Manual

Operation
908 SmartMedia
Smart Media Card FTP File Management
1. The Smart card files can be copied from the Smart media card to your CTX WinAdmin PC and vice
versa using the CTX WinAdmin Smart Media FTP function. The Smart Media card must be installed in
the CTX processor and formatted using Program 908 before it can be used. After it is installed and
formatted the CTX will automatically store files under the Admlog, Errolog and Evnttrce folder of the
Smart Media card - see CTX Smart Media folders below for details.
2. New folders must be created (with your own chosen names) on the CTX WinAdmin PC using Windows
Explorer before you can use the Smart Media FTP screen. The folders must be created under the
following path which already exists on the CTX WinAdmin PC:
CTX>WinAdmin>Ctmc_Local>SmartMedia>Your Folder Name.
3. After the SM card has been formatted and your folders have been created on the CTX WinAdmin PC
you can manage files as described below:
• Download: Copy files from the CTX Smart Media Card to your CTX WinAdmin PC.
• From the CTX Smart Media drop down, select the CTX Smart Media folder and file(s) that should
be copied to the CTX WinAdmin PC.
• From the Local Folder drop down, select the CTX WinAdmin PC folder to which the files should be
copied to - then click on Download.
• Upload: Copy files from the CTX WinAdmin PC to the CTX Smart Media card
• From the Local Folder drop down, select the CTX WinAdmin PC Smart Media folder and file(s)
that should be copied to the CTX Smart Media card.
• From the CTX Smart Media Folder drop down, select the CTX Smart Media folder to which the
files should be copied to - then click on Upload.
• Delete SM File: Delete files stored on the CTX Smart Media card.
• From the CTX Smart Media drop down, select the CTX Smart Media folder and file(s) that should
be deleted - them click Delete SM file.

CTX SmartMedia Folders

Running the Normal and Forced options of this program creates five folders on the SmartMedia card as
follows:
• Admlog – The Admlog folder saves a history of CTX Administration (programming) command entries
in xxx.SNP and xxx.DKT files. SNP files provide a log of CTX WinAdmin entries and DKT files
provide a log of programming Telephone entries.
• Errlog – System error logs are saved into this folder. See Maintenance chapter, Event Trace Control
Programs 903, 904 and 905 to set up trace.
• Evnttrce – CTX WinAdmin Event Trace files are saved into this folder.
• Progdata – Your Strata CTX programmed settings are all saved in this folder. When a backup is
performed, Strata CTX saves programmed data to the Progdata folder as a default.dat file.
To perform the backup function you must first delete any existing default.datfiles to allow CTX to
Note
create a new default.dat file.
• Program – The operating software of the Strata CTX is saved in this folder as a nhs.prg file.
10-6
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03