Toshiba Strata CTX Programming Manual page 359

Programs 500~577
(continued)
Button Sequence
521 LCR Route Plan Digit
Analysis Assignment
,
$! C‚yq
521-00 Analysis Digits
n,
C‚yq
521-01 Route Plan Number
, n, ,
A7 C‚yq C‚yq
522 LCR Exception
Number Route Plans
,
$!! C‚yq
522-00 Exception Route Plan
Table
n,
C‚yq
522-01 Exception Route Plan
, n, ,
A7 C‚yq C‚yq
523 LCR Route Plan
Schedule Assignment
,
$!" C‚yq
523-00 Route Plan
n,
C‚yq
523-01 Type of Day
, n,
A7 C‚yq
523-02 LCR Time of Day
, n,
A7! C‚yq
523-03 Station LCR Group
, n,
A7" C‚yq
523-04 Route Choice Table
, n, ,
A7# C‚yq C‚yq
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Value(s)
n = Up to 11 digits
Wild Card uses and
 YÃ
where = 0~9 and = 2~9
Y 
n = 0~64
(default = 0)
n = Up to 11 digits
Wild Card uses and
 YÃ
where = 0~9 and =
Y 
2~9

n = 1~64
(default = 0)
n = 1~64
n = 1. Weekday
2. Weekend
3. Holiday
n = 1. Time Zone1
2. Time Zone2
3. Night
n = 1~16
(default = 1)
n = 1~128
(default = 1)
Telephone Button Programming
Summary
This program builds the basic LCR Analysis Table.
Enter the external digit strings (area codes, toll prefixes, service
codes, etc.) to be assigned to a Route Plan Analysis Table.
Strings may be up to 32 digits long. There Route Plan Analysis Table
may have 1280 members. A digit string can only be in one table at a
time.
Enter the Route Plan number to which to assign the Analysis Digits.
Note Entering 0 deletes the Analysis Digits from the table to which
they had been assigned.
This command assigns up to 1280 dialed external digit strings to the
Route Plan Exception Analysis Table which assigns each string to 1
of 64 Route Choice Tables. The values expressed here are
exceptions to the values established in Program 521.
Enter the external digit strings (area codes, toll prefixes, service
codes, etc.) to be assigned to a Route Plan Exception Analysis Table.
Strings may be up to 32 digits long. The Exception Route Plan
Analysis Table may have 1280 members. A digit string can only be in
one table at a time.
Enter the Route Plan Table in which to assign the Exception Digits.
Note Entering 0 deletes the Exception Digits from the table.
This command assigns Route Plan Schedule Tables for LCR. Each
table is a 3-dimensional array of 144 values (3 Types of Day x 3 Times
of Day x 16 LCR Groups).
Enter the Route Plan Number to build a schedule indexed by Time of
Day, Type of Day and LCR Group.
Select the Type of Day.
Select the Time Zone.
Select the Station LCR Group.
Enter the Route Choice Table Number to be used with this
combination of time, type and LCR group.
500 Series Programs
13-81