Toshiba Strata CTX Programming Manual page 358

Telephone Button Programming
500 Series Programs
Programs 500~577
Button Sequence
517 Multiple Calling Group
Assignment
,
$ & C‚yq
517-00 Multiple Call Group
Number
n,
C‚yq
517-01 MC Group Pilot
Number
, n,
A7 C‚yq
517-02 Ring Delay 1 Timer
, n,
A7! C‚yq
517-03 Ring Delay 2 Timer
, n,
A7" C‚yq
517-04 System Call Forward
, n,
A7# C‚yq
517-05 Voice Mail ID
, n, ,
A7$ C‚yq
518 Multiple Calling
Members Assignment
,
$ ' C‚yq
518-01 Multiple Calling Group
Index
, n,
A7 C‚yq
518-02 Member Index
Number
, n,
A7! C‚yq
518-03 Member Type
, n,
A7" C‚yq
518-04 Member DN
, n,
A7# C‚yq
518-05 Ringing Options
, n, ,
A7$ C‚yq
520 LCR Local Route Plan
Assignment
,
$! C‚yq
520-01 Local Area Code
, n,
A7 C‚yq
520-02 Local Route Plan
, n, ,
A7! C‚yq
13-80
(continued)
Value(s)
n = 1~16 (CTX100),
1~32 (CTX670 Basic)
1~64 (CTX670 Exp.)
n = 1~5 digits
n = 1~180
n = 1~180
n = 0~32
n = Up to 10 digits
C‚yq
n = 1~16 (CTX100), 1~32
(CTX670 Basic) and 1~64
(CTX670 Exp.)
n = Up to 32 digits
n = No Data
Dialing Digits
n = Up to 32 digits
n = Immediate
Delay 1
C‚yq
Delay 2
n = 3 digits
n = 1~64
(default = 1)
C‚yq
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
Select a group number.
Enter the Pilot Directory Number that should be assigned to the
Multiple Call Group. This can be any number 1~5 digits that does not
conflict with numbers in the current system Number Plan.
Set the timer in seconds.
Set the timer in seconds.
Assign a System Call Forward template number to the multiple calling
group. Enter 0 or 1~32.
Enter the VM call forward ID digits for the multiple calling group
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
This program assigns members to a group.
Enter a group number.
Enter the DN of the extension you wish to add.
Enter Dialing Digits to make the extension ring.
Enter the DN of the extension you wish to add.
Select either: Immediate, Delay 1 or Delay 2.
There are 64 LCR route plans. This assignment is used to select
which LCR route plan should be used to route local calls. The Local
Route Plan, which must be defined in the route definition assignment,
determines which CO line group is used for local outgoing calls.
Enter the area code for the dialing area in which the system is
installed. This is the area code for the Central Office (CO) that
provides local CO lines to the system. If no data is entered in this
field, any previously programmed data is lost.
Enter the LCR Route Plan number that should be used to route local
calls. Local calls are made by dialing 7-digit public telephone numbers
that do not require an Area Code. There are 64 LCR Route Plans
from which to choose.
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Summary