Toshiba Strata CTX Programming Manual page 26

Strata CTX Programming Guidelines
Step 1: Use Default Auto-programming to Start Up
Table 1-7 IPT Automatic Settings
Item
DN Setting
Accommodated terminal setting
(Station ID)
Accommodated terminal setting
(IP Address)
Accommodated terminal setting
(MAC addresses)
Table 1-8 System Related Basic Settings
Item
QOS Control
Station ID
Terminal authentication setting
1-6
Description
DN setting of the terminal
accommodated in BIPU
Parameter setting of Station
ID in BIPU
Parameter setting of IP
address in BIPU
Parameter setting of MAC
addressses in BIPU
Description
Setting of priority control by
Diffserv/IEEE802.1p
Automatic setting of Station
ID
Application or non application
of connection restriction
function using MAC address
Settings
The number plan conforms to BDKU16.
Assigned in the order of the lowest slot
number.
Station ID = PDN
IP address = 0.0.0.0
MAC addresses = (no data)
Settings
Use of Diffserv: Not applicable
Set value of DSField = 0
Use of IEEE802.1p: Not applicable
Priority level: Voice
Not allowed
Not apply
Strata CTX Programming - Part 1: Getting Started 04/03