Toshiba Strata CTX Programming Manual page 430

System Error Codes
Service Programming Error Codes
Program Code
32
51
531
82
98
532 -
32
533
51
98
32
534 51
98
48
51
540
52
80
20
541
52
80
49
550
80
49
570
50
49
571
50
B-20
Sub-
Occurred FB
parameter
A7
A7
A7
A7

A7
A7
A7
A7
A7
A7
A7
A7
A7
A7
A7


A7 —A7'
A7 —A7'
A7
A7!
A7 —A7#
A7 —A7#
Error Descriptions
A character(s) that is not permitted is included in the specified
code.
LCR OLG Access codes cannot be repeated. The value
entered cannot be registered (e.g., If 1234 is registered, 123
cannot be registered).
The allowable number of LCR OLG Access codes has been
exceeded.
The allowable number of DR sharing tables has been
exceeded.
No error occurs for this Program except for common errors.
A character(s) that is not permitted is included in the specified
code.
Dial Strings cannot be repeated. The value entered cannot be
registered (e.g., If 1234 is registered, 123 cannot be
registered).
The allowable number of DRLs has been exceeded.
A character(s) that is not permitted is included in the specified
code.
To add a DRL to the DR Exception Table, the DRL number
must be complete.
The allowable number of participants in the DR Exception
Table has been exceeded.
An incoming destination number must be entered when After
Shift Type field is set to Dialing Digits.
The entered value conflicts with an existing number scheme.
The entered DN conflicts with an existing DKT, ISDN
extension, etc.
The entered DN does not exist.
A character(s) that is not permitted is included in the specified
code.
The entered DN conflicts with an existing DKT, ISDN
extension, etc.
The entered DN does not exist.
Two or more OLG numbers with the same value exist in the
same group.
The entered OLG number does not exist.
Registered Digit Length cannot be less than the Verified Digit
Length.
Registered Digit Length cannot be less than the Verified Digit
Length.
The same account code cannot be repeated.
The same account code cannot be repeated.
Strata CTX Programming - Part 4: Appendices 04/03