Station Pdn Table View - Toshiba Strata CTX Programming Manual

Station

Station PDN Table View

F
IELD
02 Number
03 Name
Station PDN Table View
This screen shows the entire list of
available PDNs (shown right).
Depending on the speed of your PC
Note
and the size of your database, the
table may take several minutes to
download.
The PDN Table View page includes the
following buttons:
• Edit Names: Click this button to edit
user names. After clicking this button,
click the User Name box to edit.
Note Only use all upper case letters when
adding or editing user names. Lower case letters will be stored in the CTX if submitted, however,
they will not register on the DKT LCDs.
• Submit: Click outside the User Name box and then click Submit after you have made all name changes.
• Refresh: To query the latest data from CTX.
• Print: To print a copy of the table to a local printer.
You can sort in ascending or descending order by clicking the column header.
5-30
D
ESCRIPTION
This is the dialable number stored in the speed dial bin.
Possible values: Up to 32 digits, 0~9, *, # and Pauses (default = no value)
To enter pauses enter Px, where x equals 0~9 (seconds), which is the length of the
pause, 0=10 seconds.
Notes
• If the number being entered exceeds the 32 digits, the next speed dial location
will automatically be appended to create longer numbers.
• Also another speed dial bin can be nested within another bin for dialing common
numbers. If speed dial bin 100 has long distance access digits 1010321, these
digits can be nested in to other speed dial bins by using *100 as the first digits of
the other bins. Example putting *10017145563425 into speed dial bin 150 would
cause SD150 to dial the access digits plus the number 10132117145563425.
• If you are programming from the Telephone the digits * and # have a special
meaning when programming speed dial numbers. The # digit indicates the end
of entry and * is an escape character. To dial the digits * or # as part of the
number; enter ** or *#. To enter pauses enter *0~*9. The second digit
represents the number of seconds for the pause function.
Enter the LCD Name that displays on LCD dial directories.
Possible values: Up to 8 characters (default = no value)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03