Ctx Restart - Toshiba Strata CTX Programming Manual

Operation
System Setup

900 CTX Restart

Prerequisite Program:
This program enables you to reset hardware and initializes or restores programmed data.
CAUTION!
F
IELD
Restart CTX
Initialize CTX
Important!
Restoring Data from SmartMedia
When initializing with Initialize CTX, you can restore custom data that was previously programmed and
stored on a SmartMedia card. To do so, follow the steps below.
1. Insert a SmartMedia card that contains the Progdata folder with the default.dat file. The default.dat
file contains your custom settings and can be created by running Data Backup. See
on page 10-13.
2. Run System Initialization by clicking Initialize CTX.
Notes
Restoring data from the SmartMedia card may take an hour or more.
G
During the restore process, the telephone LCD may display date and time data. This does not
G
necessarily indicate completion of the restore process.
To verify completion of the restore process access the Programming Mode from a telephone and enter
G
your password. If the system enables you to continue, the data restore process is complete.
10-2
None
Both commands will drop all existing calls.
D
ESCRIPTION
Clicking on this button initializes a System Power Off/Power On sequence to reset
hardware. This is also known as an Initialize Level 2.
Clicking on this button invokes an Initialize Level 1 sequence which erases
programmed data and enters default data into the Strata CTX System.
If a Toshiba SmartMedia is installed in the available slot, using this option restores
data from backed up data from the SmartMedia (see
SmartMedia below).
Choosing Initialize CTX without installing a SmartMedia Card deletes all programmed data
and returns your Strata CTX to factory default settings. All previously programmed data is
lost (See "Restoring Data from SmartMedia" on page 10-2).
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
Restoring Data from
"910 Data Backup"