Toshiba Strata CTX Programming Manual page 321

Button Sequence
207-02 Registration Data
(See details below)
, n,
A7! C‚yq
1. FB00 – Primary DN.
2. FB01 – The button that you assign as the One Touch Button on the DKT.
You can assign the One Touch Button from the DKT for the DKT FB key, Add-on Module FB key and
also DSS Console FB key. Follow the steps and examples below to assign One Touch Buttons for each
of the following.
➤
To assign the One Touch Button for the DKT
➤
The data is 1~24. Example: FB1 is 1, FB20 is 20.
➤
To assign the One Touch Button for the Add-on Module
➤
Use four digits (1yzz) to assign the single touch button for the Add-on Module.
1 is for Add-on Module.
y is the location of Add-on Module (1 or 2)
zz is the feature button for the Add-on Module (01~20). zz is equal to two digits.
Example 1: FB01 for Add-on Module 1 is 1101
Example 2: FB20 for Add-on Module 2 is 1220
➤
To assign the One Touch Button for the DSS Console
➤
Use four digits (2yzz) to assign the single touch button for the DSS Console.
2 is for the DSS console
y is the location of DSS console (1~8 )
zz is the feature button for DSS console ( 01~60 ). zz is equal to two digits.
Example 1: FB01 for DSS console 1 is 2101
Example 2: FB20 for DSS console 8 is 2860
3. FB02 – The Information data for One Touch Button
From the programming DKT.
You will have to use the ESC code when programming the DKT. The table below gives you One
Note
Touch Data Entry sequences.
One Touch Data Entry Sequences
Data for Single Touch Button
1~9, 0
#
Mode
Page
Scroll
Feature
Msg
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Value(s)
n = Up to 64 digits
Setting code from DKT
1~9, 0
[Vol Up] +
[Vol Up] + #
[Vol Up] + [Mode]
[Vol Up] + [Page]
[Vol Up] + [Scroll]
[Vol Up] + [Feature]
[Vol Up] + [Msg]
Registration of the operating data.
1~9, 0
&
&#
&SK01
&SK02
&SK03
&SK04
&MSG
Telephone Button Programming
200 Series Programs
Summary
Display Data
13-43