Toshiba Strata CTX Programming Manual page 333

Programs 303~315
(continued)
Button Sequence
304-06 Pooled Key Number
, n,
A7% C‚yq
304-07 COS
, n, , n,
A7& Tƒx… Ã
, n,
Tƒx… ÃC‚yq
304-08 DRL
, n, , n,
A7' Tƒx… Ã
, n,
Tƒx… ÃC‚yq
304-09 FRL
, n, , n,
A7( Tƒx… Ã
, n,
Tƒx… ÃC‚yq
304-10 QPL
A7  Áà Tƒx… Á Ã
Tƒx… Á ÃC‚yq
304-11 DID Digits
, n,
A7 C‚yq
304-12 Speech/3.1 KHz
, n,
A7 ! C‚yq
304-13 Ringing Timer Delay 1
, n,
A7 " C‚yq
304-14 Ringing Timer Delay 2
, n,
A7 # C‚yq
304-15 Interdigit 1 Timer
, n,
A7 $ C‚yq
304-16 Interdigit 2 Timer
, n,
A7 % C‚yq
304-17 Auto Camp-on
, n,
A7 & C‚yq
304-18 Calling Number ID
, n,
A7 ' C‚yq
304-19 Intercept
, n,
A7 ( C‚yq
304-20 Send Dial Tone
, n,
A7! C‚yq
304-21 TGAC Override
, n,
A7! C‚yq
304-22 Network COS
, n,
A7!! C‚yq
304-23 LCR Group
, n,
A7!" C‚yq
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Value(s)
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 1~32
(default = 1)
n = 1~16
(default = 1)
n = 1~16
(default = 1)
n = 1~16
(default = 1)
n = 0~7
(default = 0)
n = 1. Audio (default)
2. Speech
n = 0~60 sec.
(default = 12)
n = 0~60 sec.
(default = 24)
n = 1~180 sec.
(default = 15)
n = 1~180 sec.
(default = 5)
n = 1. Enable (default)
2. Disable
n = 1. User Provided
(default)
2. Network Provided
n = 1. Enable
2. Disable (default)
n = 1. Enable
2. Disable (default)
n = 1. Enable
2. Disable (default)
n = 1~32
(default = 1)
n = 1~16
(default = 1)
Telephone Button Programming
Summary
Select ILG Pooled Line Key Group for DIT mode. The same Pooled
Line Group cannot belong to different ILGs.
0~128 (CTX670), 0~32 (CTX100) (default = 0)
Select Day 1, Day 2 and Night Values.
Select Day 1, Day 2 and Night Values.
Select Day 1, Day 2 and Night Values.
Select Day 1, Day 2 and Night Values.
Select number of DID digits received from CO.
Select Bearer Capability 3.1 KHz Audio or Speech.
Select time to ring the Delay 1 destination.
Select time to ring the Delay 2 destination.
Select Interdigit 1 timer value.
Select Interdigit 2 timer value.
Select in box to toggle Automatic Camp-on.
Select Calling Number Identification source.
Enable Intercept. A call is transferred to a special destination called
intercept position when the destination of a trunk line call is not
determined with DID, DIT or DISA. Intercept is also activated when
the destination is determined, but the call cannot be terminated due to
a defect or an incorrect number. If the system has a simplified
attendant console, the attendant console is usually specified to
terminate the call. This function ensures termination of a trunk line
call.
Enable Send Dial Tone.
Enable Trunk Group Access Code (TGAC) override.
Enter the Network COS number.
Enter the LCR Group number. Calls from this ILG cannot tandem if
this field is not entered.
300 Series Programs
13-55