System Admin Log; Memory Access Operation - Toshiba Strata CTX Programming Manual

Maintenance

907 System Admin Log

907 System Admin Log
Prerequisite Program:
Use this command to Start/Stop the System Admin Log. When running this program, make sure to insert
the SmartMedia card into the appropriate slot.
1. Insert the SmartMedia Card into the
designated slot of the Strata CTX processor.
2. From the Program Menu, click Maintenance
> System Admin Log.
3. Click to Start or Stop the System Admin
Log.
4. Click the Checking System Admin Log
Completion Status button to view progress
of this operation.
When CTX670 stops logging data, it
Note
automatically sends data to the
SmartMedia card. Run the Unmount
command (Program 908) before
removing the SmartMedia card to ensure complete data transfer.

Memory Access Operation

Prerequisite Program:
This program enables you to manipulate memory settings.
1. From the Program Menu, click
Maintenance > Memory Access.
2. Click the Read Memory or Write
Memory button to access memory.
3. Enter the memory Address to be
accessed.
4. Select size of memory to access (1~256,
default = no value).
5. Click one of the following buttons:
• New – click this button to create a
new Memory Access filename.
• Open – click this button to open an
existing Memory Access file.
6. Click Submit.
7. Click Save to save Memory Access file.
Note The Content box displays the contents of the memory address selected.
11-6
None
None
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03