Format/Unmount Smartmedia; Reference; Access Sequence; Login To Programming Mode From Your Telephone Button Pad - Toshiba Strata CIX Programming Manual

Format/Unmount SmartMedia

This program enables Administrators to format a SmartMedia card from Strata CTX WinAdmin or the
telephone button pad.
Note Strata CTX WinAdmin cannot view SmartMedia files directly. Additional hardware is required to view
the contents of the SmartMedia card.
Program Number(s): 908
Prerequisite Program:

Reference:

Access Sequence:

FB Name

Control 01
FB01
1. Press to enter parameter. Enter
to make your selection.
Hold
2. Press to confirm and
3. Wait for the
PROG
4. Enter another program number to continue programming or press
mode.
Strata CTX SmartMedia Directories
Running the Normal and Forced options of this program creates five directories on the SmartMedia card as
follows:
• Admlog – The Admlog folder saves
• Errlog – System error logs are saved into this folder.
• Evnttrce – Strata CTX WinAdmin Event Trace files are saved into this folder.
• Progdata – Your Strata CTX programmed settings are all saved in this folder.
• Program – The operating software and default data of the Strata CTX is saved in this folder.
When a backup is performed, Strata CTX saves programmed data to the Progdata folder.
Strata CIX/CTX Telephone Button Programming 11/04
None
None

Login to programming mode from your telephone button pad:

Hold ✱#✱#1✱2✱3✱ .

At the PASSWORD= prompt, Enter your password and press Hold .

At the PROG= prompt enter 908 and press Hold
.
FB Summary
Choose SmartMedia card formatting method:
Normal ñ creates any Strata CTX SmartMedia
directory that does not exist already. Exiting
directories are not overwritten by this procedure.
Forced ñ erases any existing directories and files.
All existing data is overwritten. See
SmartMedia Directories
Unmount ñ writes data into SmartMedia Card.
Always run unmount before removing the
SmartMedia card to prevent damage to the card.
Transfer ñ writes data from static RAM to
SmartMedia Card.
1
Hold
again to execute.
= prompt to appear before proceeding.
Strata CTX
for more information.
4
~ as your command choice. Press the
Telephone Button Programming
900 Series Programs

Value

LCD Prompt

1:Normal 1:NORMAL
2:Forced 2:FORCED
3:Unmount 3:UNMOUNT
4:Transfer 4:TRANSFER
Scroll Page
or
# # Hold
again to exit programming
button
1-105