Speed Dial-Advanced Features; Feature Access Codes - Toshiba Strata CT System Administrator Manual

Setting System Parameters
Speed Dial—Advanced Features

Feature Access Codes

You can program
of features as long as the keyed dial pad characters do not exceed 20 digits. To determine how many
digits you have, count 2 digits for
dial pad characters.
See Table 4
➤
To store a feature onto a
Redial
➤
o
H
o
➤
To store a feature onto a speed dial code
Redial
➤
C
Important!
G
G
G
G
Strata CT System Administrator Guide October 2000
SD
(Speed Dial) buttons with feature access codes for a single feature or a sequence
for a list of feature access codes.
SD
button
SD
+ + Feature Access Code +
See Table 4 on the following page for Feature Access code sequences.
SD
= the speed dial button the feature is stored on.
Speed Dial
+ + Speed Dial Access Code + Feature Access Code +
Do not lift the handset.
If you do not enter the entire sequence within a specified time (set in system programming for
either one or three minutes), the operation times out and your telephone returns to idle mode.
If your telephone does not have a Speed Dial, press "*" instead of Speed Dial and enter 44
instead of # in all feature sequences.
[PDNs] can be stored in speed dial sequences but [PhDNs] and [SDNs] cannot.
Cnf/Trn Hold
, [PDN] and
Redial
.
Speed Dial—Advanced Features
feature buttons and 1 digit for all other
Redial
.
19