Reverse Shift Fork Clearance; Change Lever Clearance Lnsoection - Honda Civic Service Manual

Reverse Shift Fork Clearance
Inspection
1. Measure the clearance between the reverse idler
gear {A) and the reverse shift fork (B) with a feeler
gauge (C). lf the clearance is more than the service
limit, go to step 2.
Standard:
0.20-0.59 mm (o.oo7 0.024 in.l
Service Limit: r.3 mm {0.051 in.)
Measu re the width of the reverse shift fork.
. l f d i s t a n c e i s n o t w i t h i n t h e s t a n d a r d , r e p l a c e t h e
reverse shift fork with a new one.
. lf distance is within the standard, replacethe
reverse gear wrln a new one.
Standard: 13.4 13.7 mm (0.527 0.539 in.l
I
Change Lever Clearance Inspection
1 . Measure the clearance between change lever (Al
and the select lever (B) with a feeler gauge (Cf. lf
t h e c l e a r a n c e i s m o r e t h a n t h e s e r v i c e l i m i t , g o r o
step 2.
Standard:
0.05 0.25 mm (0.002-0.010 in.)
Service Limit: 0.50 mm {0.020 in.)
2. Measure the groove of the change lever'
. lf distance is not within the standard, replace the
c h a n g e l e v e r w i t h a n e w o n e .
. l f d i s t a n c e i s w i t h i n t h e s t a n d a r d , r e p l a c e t h e
select lever with a new one.
1 5 . 0 0 1 5 . 1 0 m m ( 0 . 5 9 1 - 0 . 5 9 4 i n . )
Standard:
,tl
I
q I
1 3 - 1 9