Honda Civic Service Manual page 619

Conventional Brake Components
{
Brake Hoses and Lines Inspection
1. Inspect the brake hosesfordamage, deterioration, leaks, interference, andtwisting.
2. Check the brake lines for damage, rusting. and leakage. Also check for bent brake lines.
3. Check for leaks at hose and line joints or connections, and retighten if necessary.
4. Check the master cylinder and ABS modulator unit for damage and leakage.
NOTE: Replace the brake hose clip whenever the brake hose is serviced.
15 N.m (1.5 kgf.m, 11 lbf.ftl
ABS MODULATOR UNIT-Io-BRAKE LINE
15 N.m {1.5 kgf m.11 lbf.ftl
BRAKE HOSE-to-CALIPER
lBANJO BOLTI
3il N.m {3.5 kgf.m.25 lbt'ft)
BLEEO SCREW
9 N.m {0.9 kgf.m,7 lbf.ftl
MASTER CYLINDEB-to-BRAKE LINE
15 N m {1.5 kgt.m, ll lbf.ft)
CONTROL VALVE-to-
L
BRAKE HOSE.tO-CALIPER
{BANJO BOLTI
34 N.m {3.5 kgf.m, 25 lbl.ft)
BLEED SCBEW
9 N.m
10.9 kgf.m, 7 lbf ft)
BRAKE LINE
15 N.m 11.5 kgf m, 11 lbf.ft)
BRAKE LINE-Io-BRAKE HOSE
15 N.m (1.5 kgf.m,11lbf.ftl
BRAKE LINE-to-BRAKE HOSE
t''
/,i'i'
,/ ,l
t
t,.. -)
19-24