Front Seat Removal/lnstallation
For some models: SRS components are located in this
area. Review the SRS component locations (see page
23-'13) and the precautions and procedures (see page
23-14) in the SRS section before performing repairs or
service.
NOTE
. When prying with a flat-tip screwdriver, wrap it with
protective tape to prevent damage.
. Take care not to scratch the body or tear the seat
covers.
. Put on gloves to protect your hands.
1, Make sure you have the anti-theft code for the radio,
then write down the frequencies for the preset
butlons.
Disconnect the negative cable from the battery, and
wait at least 3 minutes before beginning work.
Remove the seat track end covers (A) from the back
of both seat tracks.
Outef:
lnner:
3 .
\
4. Remove the bolts securing the front seat.
Fastener Locations
1 0 x 1 . 2 5 m m
> : Bolt,
@
(cont'd)
20-71