Glass Height Adjustment; Glass Replacement - Honda Civic Service Manual

Glass Height Adjustment
The roof panel (A) should be even with the glass
weatherstrip (B). to within 2*0.5/ 1 mm (0.08+0.02l
0.04 in.) all the way around. lf not, make the following
adjustment:
B
2 + 0 . 5 / 1 m m
{0.08 + 0.02/-0.0i1 in.}
2.
1 ,
\ o
Remove the bracket cover from each side.
L o o s e n t h e n u t s { A ) , a n d i n s t a l l t h e s h i m s ( B )
between the glass frame (C) and glass bracket (D)
on each side.
Shim ihickness: Front and rear max. 2 mm 10.08 in.l
Forward
A
6 x 1 . 0 m m
I N.m (0.9 kgf.m,7 lbt.ft)
3. lf necessary, repeat on the opposite side.
B
\
Glass Replacement
'L
C l o s e t h e g l a s s f u l l y .
S l i d e t h e s u n s h a d e a l l t h e w a y b a c k .
Remove the screws (A), then remove both bracket
covers (B). Remove the nuts (C) and shims {D) from
both glass brackets (E).
Fastengr Locations
c O ,
6 x 1 . 0 m m
9 N.m {0.9 kgf.m, 7 lbf.ft}
4. Remove the glass {A) by lifting it up. Do not
damage the roof panel.
5. Install the glass in the reverse order of the removal,
a n d a d j u s t t h e g l a s s h e i g h t a l i g n m e n t .
6. Check for water leaks. Use free-flowing water from
a hose without a nozzle. Do not use high-pressure
water.
Nut. il
@
A } : Screw, 2
E
20-37