EPS Components
Steering Gearbox Installation (cont'd)
7. Installthe body stiffener (A), and torque the
mounting bolts to the specified torque.
8 x 1.25 mm
29 N.m {3.0 kgf.m,22lbf.ftl
L
Install the heater valve (A) on the bulkhead, and
connect the heater valve cable end (B) to the heater
valve arm (C). Readjust the heater valve cable {see
page 21-46).
9.8 N.m
(1.0 kgf m,
7.2 tbf.ftl
L-t
,
:.i.t'
17-64
9. Reinstall the heater hose (A) on the hose bracket.
Install the engine wire harness clamps (B) to the
three harness brackets.
Under the steering gearbox, install the ground
cable terminal (A) on the steering gearbox housing.
1 0 .
' I t .
9 . 8 N . m
{1.0 kgf.m, 7.2lbf.ft)