Conventional Brake Components
Parking Brake Switch Test
1. Remove the rear console, and disconnect the
connector (A)from the switch (B).
Check for continuity between the switch terminal
a n d b o d y g r o u n d :
. With the brake lever up, there should be
continuity.
. With the brake lever down, there should be no
continuity.
R
'dFu
\ ! E
!UF-
Y
1 9 - 1 0
Brake Fluid Level Switch Test
Check for continuity between the terminals (A) with the
float in the down position and the up position.
. Remove the brake fluid completely from the reservoir.
With the float down, there should be continuity.
. F j l l t h e r e s e r v o i r w i t h b r a k e f l u i d t o M A X ( u p p e r ) l e v e l
(B). With the float up, there should be no continuity.
\