Wheelalignment - Honda Civic Service Manual

Front and Rear Suspension
WheelAlignment
The suspension can be adjusted for front camber, front
toe, and rear toe. However, each of these adjustments
are interrelated to each other. For example, when you
adjust the toe, the camber changes. Therefore, you
must adjust the front wheel alignment whenever you
adjust the camber or toe.
Pre-Alignment Checks
For proper inspection and adjustment of the wheel
alignment, do these checks:
1. Release the parking brake to avoid an incorrect
measurement.
Make sure the suspension is not modified.
C h e c k t h e t i r e s i z e a n d t i r e p r e s s u r e
Tire size:
Front/rear: 195/60R15
Tire pressure:
Front:
230 kPa {2.3 kgf/cm',33 psil
Rear:
210 kPa |'2.1 kgf/cm', 30 psi)
Check the runout of the wheels and tires.
Check the suspension ball joints. (Hold a wheel
with your hands, and move it up and down and
right and left to check for wobbling),
2 .
3 .
Bounce the vehicle up and down several times to
stabilize the suspension.
18-4
Front Caster lnspection
U s e c o m m e r c i a l l v a v a i l a b l e c o m D u t e r i z e d f o u r w h e e l
a l i g n m e n t e q u i p m e n t t o m e a s u r e w h e e l a l i g n m e n t
(caster, camber, toe, and turning angle). Follow the
eouioment manufacturer's instructions.
Check the caster angle. lf the caster angle is not within
the specification, check for bent or damaged
susoensron comoonents.
Front caster angle: 1'40't 1"
\