Honda Civic Service Manual page 931

Audio System
Audio Unit Removal/lnstallation
NOTE:
. Put on gloves to protect your hands.
. Take care not to scratch the dashboard and related
pa rts.
1. Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's
preset buttons.
2. Remove the driver's dashboard lower cover (see
page 20-59).
3. Remove the two mounting bolts, then pull out the
center panel (A).
4 . Disconnect the audio connector (B) and antenna
lead (C), heater control panel connectors (D) and
HAVC push switch assembly (E), then remove the
center panel.
22-100
! \ ,
7 .
Remove the heater control panel (see page 21 38).
R e m o v e t h e f o u r m o u n t i n g b o l t s a n d t h e a u d i o u n i t
from the radio brackets.
I n s t a l l t h e a u d i o u n i t i n t h e r e v e r s e o r d e r o f
removal, and note these items:
. Make sure the audio unit and A/C connectors are
plugged in properly, and the antenna lead is
connected properly.
. Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
\ v