Honda Civic Service Manual page 749

Cowl Covers Replacement
1 . R e m o v e t h e w i n d s h i e l d w i p e r a r m s ( s e e p a g e 2 2 - 1 4 5 ) .
2. Remove the windshield side trim from both sides (see step 2 on page 20-19).
3. Pullthe hood rear seal (A) away from the cowl covers, then remove it, and using a clip remover, detach the clips
(B) from the cowl covers. Take care not to scratch the cowl covers.
Fastener Locations
B > r C l i p , 3 C > : C l i p , 8
:- ::::
= - --::;-:
4 . Detach the clips (C) by carefully pulling the passenger's cowl cover {D) upward, to release the hooks {E), and pull
out the cover forward to release the hooks (F), then remove the cover. Take care not to scratch the body,
Detach the clips (C) by carefully pulling the driver's cowl cover (G ) upward. and pull out the cover forward to
release the hooks (H), then remove the cover. Take care not to scratch the body.
Installthe covers in the reverse order of removal, and note these items:
. R e p l a c e a n y d a m a g e d c l i p s .
. Push the clip portions into place securely.
. Reinstall both windshield side trim properly (see step 26 on page 20-24).
20-95