1 .
Roof Molding Replacement
Apply protective tape to the body (A). Using a
flat-tip screwdriver wrapped with protective tape
(B), pry up on the roof molding (C). Take care not to
scratch the bodv.
Pull up and slide the roof molding to release the
front bracket (D) from the pin (E).
Pull up the front portion of roof molding.
4, Pull up and release the rear bracket (A)from the pin
(B), then remove the roof molding (C).
Install the molding in the reverse order of removal,
and note these items:
. T a k e c a r e n o t t o d a m a g e t h e w i n d s h i e l d m o l d i n g .
. Make sure the roof molding is installed securely.
5 .
..:.::.l.
g
20-97