Honda Civic Service Manual page 682

Glass
1 6 .
Rear Window Replacement (cont'd)
With a sponge, apply a light coat of body primer to
t h e o r i g i n a l a d h e s i v e r e m a i n i n g a r o u n d t h e r e a r
window opening flange. Let the body primer dry for
at least 10 minutes;
. Do not apply glass primer to the body, and be
careful not to mix up glass and body primer
sponges.
. Never touch the primed surfaces with your hands.
',,,,,' : Apply body primer he.e.
20 mm
10.79 in.l
2 m m
{0.08 in.)
1 7 . Before filling a cartridge, cut a
"V" in the end ofthe
nozzle {A} as shown.
20-28
7 mm (0.27 in.)
I
18. Pack adhesive into the cartridge without air pockets
to ensure continuous delivery. Put the cartridge in a
caulking gun, and run a bead of adhesive (A)
around the edge of the rear window (B) as shown.
With the glass primer (C) you applied in step 15 as
a guide, apply the adhesive to both side portions of
the rear window.
Apply the adhesive within 30 minutes after
applying the glass primer. fMake a slightly thicker
bead at each corner.
12 mm
r,
10.47 in.) ,\
ii'-
A
(0.28 in.l
\
aru'.1{-----"