Honda Civic Service Manual page 112

7 , I n s t a l l t h e c a m c h a i n g u i d e B .
H4
\ i l t
H g
q
8 x 1.25 mm
22 N.m
(2.2 kgf.m, 16lbt.ft)
8. Remove the Din from the auto-tensioner,
Check the chain case oil seal for damage. lf the oil
seal is damaged, replace the chain case oil seal
( s e e p a g e 6 - 2 1 ) .
9 .
1 0 .
1 1 .
Remove old liquid gasket from the chain case
mating surfaces, bolts, and bolt holes.
Clean and dry the chain case mating surfaces.
Apply liquid gasket. P/N 08718-0009, evenly to the
cylinder block mating surface ofthe chain case and
t o t h e i n n e r t h r e a d s o f t h e h o l e s .
Apply liquid gasket to the cylinder block upper
surface contact areas (A) on the chain case.
Apply liquid gasket, PiN 08718-0009, evenly to the
oil pan mating surface of the chain case and to the
inner threads of the holes.
NOTE: Do not installthe parts it 5 minutes or more
have elapsed since applying liquid gasket. lnstead,
reapply liquid gasket after removing old residue.
(cont'd)
1 4 .
Apply liquid gasket
along the broken line.
Apply liquid gasket
along the broken line.
6-17