Reverse Shift Fork Clearance Inspection - Honda 2002 Accord Manual

Reverse Shift Fork Clearance Inspection
1. Measure the clearances between the reverse shift
fork (A) and 5th/reverse shift piece pin (B).
• If the clearance are more than the service limit,
go to step 2.
• If the clearance are within the service limits, go to
step 3.
Standard: ® : 0 . 0 5 - 0 . 3 5 mm
(0.002 0.014 in.)
© : 0 . 4 - 0 . 8 mm
(0.02-0.03 in.)
Service Limit: ® : 0.5 mm (0.02 in.)
® : 1.0 mm (0.04 in.)
2. Measure the widths of the groove in the reverse
shift fork (A).
• If the widths of the grooves are not within the
standard, replace the reverse shift fork with a
new one.
• If the widths of the grooves are within the
standard, replace the 5th/reverse shift piece with
a new one.
Standard: ® : 7 . 0 5 - 7 . 2 5 mm (0.278-0.285 in.)
© : 7 . 4 - 7 . 7 mm (0.29 0.30 in.)
3. Measure the clearance between the reverse idler
gear (A) and reverse shift fork (B). If the clearance is
more than the service limit, go to step 4.
Standard:
Service Limit:
0.5-1.1 mm (0.02-0.04 in.)
1.8 mm (0.07 in.)
4. Measure the width of the reverse shift fork (A).
• If the width is not within the standard, replace the
reverse shift fork with a new one.
• If the width is within the standard, replace the
reverse idler gear with a new one.
Standard: 1 3 . 0 - 1 3 . 3 mm (0.51 - 0 . 5 2 in.)
A
13-25