Honda Civic Service Manual page 547

EPS Components
Steering Gearbox Overhaul (cont'dl
Special Tools Required
. Locknut wrench 07ZAA-S5A0100
. Pincers, Oetiker 1098 or equivalent, commercially
a v a i l a b l e .
NOTE:
. Refer to the Exploded View as needed during this
procedure.
. Do not allow dust, dirt, or other foreign materials to
enter into the steering gearbox.
Eemoval
1, Remove the steering gearbox (see page 17-b1).
Disassembly
2. Unbend the lock washer (A).
. -
- , ' i .
Hold the bracket (A) with one wrencn, anq unscrew
both tie-rod ends (B) with another wrench. Remove
the lock washers.
1 7-5 6
4. Remove the stop plate (A). the 12 mm flange bolts
(B), the O-rings (C), and the bracket (D) from the
sleering gearbox.
Loosen the locknut (A), then remove the rack guide
screw (B), sprlng (C), disc washer (D), and rack
g u i d e ( E ) f r o m t h e s t e e r i n g g e a r b o x .
i::..:4,. ,
-
- -.
-
:.--. '