Honda Civic Service Manual page 821

Heating and Air Gonditioning
Compressor Clutch Overhaul (cont'd)
5. Reassemble the clutch in the reverse order of
disassembly, and note these items:
. I n s t a l l t h e f i e l d c o i l w i t h t h e w i r e s i d e f a c i n g
down, and align the boss on the field coil with the
h o l e i n t h e c o m p r e s s o r .
. Clean the rotor pulley and compressor sliding
surfaces with contact cleaner or other
non-petroleum solvent.
. I n s t a l l n e w s n a p r i n g s , n o t e t h e i n s t a l l a t i o n
direction, and make sure they are fully seated in
the groove.
. Make sure that the rotor pulley turns smoothly
after it's reassembled,
. R o u t e a n d c l a m p t h e w i r e s p r o p e r l y o r t h e y c a n
be damaged by the rotor pulley.
21-50