. D o n o t s p i l l b r a k e f l u i d o n t h e v e h i c l e ; i t m a y d a m a g e t h e p a i n t ; i f b r a k e f l u i d g e t s o n t h e p a i n t , w a s h i t o f f

immediately with water.

. To prevent dripping. cover disconnected hose joints with rags or shop towels.

. C l e a n a l l p a r t s i n b r a k e f l u i d a n d a i r d r y ; b l o w o u t a l l p a s s a g e s w i t h c o m p r e s s e d a i r '

. Before reassembling, check that all parts are free of dust and other foreign particles

. Replace pans with new ones as specified in the illustration.

. Make sure no dirt or other foreign matter contaminates the brake fluid.

. When reusing pads, always reinstallthem in their original positions to prevent loss of b ra king efficie ncy.

. Do not reuse drained brake fluid.

. U s e o n l y c l e a n H o n d a D O T 3 b r a k e f l u i d . N o n - H o n d a b r a k e f l u i d c a n c a u s e c o r r o s i o n a n d s h o r t e n t h e l i f e o f t h e

system.

. Do not mix different brands ot brake fluid as they may not be compatible.

. C o a t t h e p i s t o n , p i s t o n s e a l g r o o v e , a n d c a l i p e r b o r e w i t h c l e a n b r a k e f l u i d .

. Make sure no grease or oil gets on the brake discs or pads.

. R e p l a c e a l l r u b b e r p a r t s w i t h n e w o n e s w h e n e v e r d i s a s s e m b l e d .

. After installing the caliper, check the brake hose and line for leaks, interference. and twisting.

, nonau."rip6r qreas€ lP/N 08c30-aoa4Ml

3 4 N . m ( 3 . 5 k g f m , 2 5 l b t f t )

BOLT

WASHERS

BRAKE HOSE

i,,'IltE" / !!;,ff