Removing The Onboard Sas Enabling Key; Preliminary Steps; Concluding Steps - Fujitsu PRIMERGY RX200 S8 Upgrade And Maintenance Manual

15.5.2 Removing the onboard SAS enabling key

Upgrade and Repair Unit
(URU)
Tools: tool-less

15.5.2.1 Preliminary steps

"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 47
Ê
"Getting access to the component" on page 47
Ê
"Removing the air duct" on page 62
Ê
15.5.2.2 Removing the onboard SAS enabling key
Figure 235: Removing the onboard SAS enabling key
Ê Firmly pull up on the release lash until the onboard SAS enabling key pops
out of its connector.

15.5.2.3 Concluding steps

"Installing the air duct" on page 62
Ê
"Reassembling" on page 52
Ê
RX200 S8
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
301