Preparing The Heat Sink And Processor - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

9.5.3.1

Preparing the heat sink and processor

When installing a new heat sink
Figure 78: Heat sink with protective cover
Ê Remove the protective cover from the heat sink (see arrow).
V
CAUTION!
Ensure not to touch the heat-conductive paste on the bottom of the
heat sink.
When reusing a heat sink
Ê Ensure that all residual thermal paste has been thoroughly cleaned off the
copper surface of the heat sink.
Ê Apply thermal paste to the processor surface as described in section
"Applying thermal paste" on page
BX920 S3
209.
Upgrade and Maintenance Manual
Processors
203