Ip Configuration; Figure 6-11. Asterion Dc Power Supply Device Identify; Figure 6-12. Asterion Dc Power Supply Ip Configuration Page - Ametek ASTDC60D1C-E00 Programming Manual

Asterion DC Series Programming
•
Gateway: IP address through which the instrument communicates with systems
that are not on the local subnet.
•
Firmware Version: the version of the firmware that is currently installed.
•
Device Identify: When set button is pressed the following screen will appear.
Refer to Figure 6-11

IP Configuration

6.5.2
To access this web page, users need to login using the User ID and Password (For
default values, refer to Section 6.2.1). You are only required to complete the
information for the parameters that you wish to change, all previously entered and
saved information remains by default (Refer to Figure 6-12).

Figure 6-12. Asterion DC power supply IP Configuration Page

Host Name: the default host name is ASTDCV-I-Sl:No. For eg: for 60V/125A device;
the default host name is ASTDC60-125-1234.
You may change this name as long as it is unique (Host Name must be limited to 15
characters for LXI compliance) so that VXI-11 Discovery and any other IP Discovery
program can identify your specific device on your network.
M330461-01 Rev A

Figure 6-11. Asterion DC Power supply Device identify

Ethernet Configuration and Remote Programming
6-15