Monitor Session Destination; Monitor Session Source - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Purpose
Command Modes
Syntax
Syntax
Description
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Examples

monitor session destination

Use this command to add destination monitor ports into sessions.
Interface configuration
monitor session <number> destination
no monitor session
<number>

monitor session source

Use this command to add source monitor port into session.
Interface configuration
monitor session <number> source direction {both | cpu-rx |
cpu-tx | rx | tx}
no monitor session
<number>
both
cpu-rx
cpu-tx
rx
tx
rd
Use this command to configure a route distinguisher (RD) for the
VRF.
VRF configuration
rd <route-distinguisher>
<route-distinguisher>
There is no route distinguisher by default.
The VRF does not take effect until the route distinguisher is con-
figured.
This example describes how to configure an route distinguisher for
the VPN named zte.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 MPLS BGP VPN Configuration
Port monitor session number, range: 1~8
Port monitor session number, range: 1~8
Direction of the traffic collecting is bidirectional
Direction of the traffic collecting is to CPU
Direction of the traffic collecting is from CPU
The direction of traffic collecting is receiving
The direction of traffic collecting is sending
Route distinguisher of the VRF, in two
formats: <1~65535>:<0~4294967295> or
A.B.C.D:<0~65535>
51