Clear Ip Igmp Packet-Count; Ip Igmp Access-Group; Ip Igmp Immediate-Leave - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Related
Commands
Purpose
Command Modes
Syntax
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
10 Confidential and Proprietary Information of ZTE CORPORATION
show ip igmp groups

clear ip igmp packet-count

Use this command to clear the statistics count of IGMP re-
ceived/sent messages.
Privileged EXEC

clear ip igmp packet-count

show ip igmp packet-count

ip igmp access-group

Use this command to set limits on an interface for multicast group
join requests by hosts. Remove limits set on an interface with the
no form of this command.
Interface configuration
ip igmp access-group <access-list-number>
no ip igmp access-group
<access-list-number>
There is no limit for multicast group join requests by hosts by de-
fault.
access-list
show ip igmp interface

ip igmp immediate-leave

Use this command to minimize the leave latency of Internet Group
Management Protocol (IGMP) memberships when IGMP Version 2
is used. Disable this feature with the no form of this command.
Interface configuration
ip igmp immediate-leave [group-list <access-list-number>]
no ip igmp immediate-leave
group-list
<access-list-number>
Standard IP access list number, range: 1~99
Standard access list number, range: 1~99