Configuring Channel Access Control (Cac) - Zte ZXR10 5900 Series User Manual

Command
iptv channel <0-256> name
ZXR10(config)#
Command
iptv channel <0-256> mvlan
ZXR10(config)#
Command
clear iptv channel<0-256>
ZXR10(config)#
Command
create iptv cac-rule<1-256>
ZXR10(config)#
Command
iptv cac-rule <1-256> name
ZXR10(config)#
Command
iptv cac-rule <1-256> prvcount
ZXR10(config)#
Command
iptv cac-rule <1-256> prvtime
ZXR10(config)#
3. To set a channel belonging to a multicast Vlan, use the following
command.
4. To delete a channel, use the following command.
Configuring Channel Access Control
(CAC)
1. To create rules of CAC, use the following command.
2. To set the name of CAC rule, use the following command.
3. To set maximum preview counts of rules, use the following
command.
4. To set maximum preview time of rules, use the following com-
mand.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 14 IPTV Configuration
Function
This sets the name of a channel.
Function
This sets a channel belonging to
a multicast Vlan.
Function
This deletes a channel.
Function
This creates rules of CAC.
Function
This sets the name of CAC rule.
Function
This sets maximum preview
counts of rules. The default is
global maximum preview count.
Function
This sets maximum preview
time of rules. The default is
global maximum preview time.
153