Gateway Statistics; Viewing Call Counters; Figure 3-134: Calls Count - AudioCodes Mediant 1000 User Manual

3.5.2

Gateway Statistics

The Gateway Statistics
connectivity information, call details and call statistics, including the number of call
attempts, failed calls, fax calls, etc. This menu includes the following page items:

IP to Tel Calls Count (refer to ''

Tel to IP Calls Count (refer to ''Viewing Call Counters''

SAS Registered Users (refer to "Viewing SAS Registered Users" on page 216)

Call Routing Status (refer to ''

Registration Status (refer to "Viewing Registration Status" on page 217)

IP Connectivity (refer to ''
Note:
3.5.2.1

Viewing Call Counters

The 'IP to Tel Calls Count' and 'Tel to IP Calls Count' pages provide you with statistical
information on incoming (IP-to-Tel) and outgoing (Tel-to-IP) calls. The statistical information
is updated according to the release reason that is received after a call is terminated (during
the same time as the end-of-call Call Detail Record or CDR message is sent). The release
reason can be viewed in the 'Termination Reason' field in the CDR message.
You can reset the statistical data displayed on the page (i.e., refresh the display), by
clicking the Reset Counters

To view the IP-to-Tel and Tel-to-IP Call Counters pages:

Open the Call Counters page that you want to view (Status & Diagnostics tab >
Gateway Statistics menu > IP to Tel Calls Count or Tel to IP Calls Count
item); the figure below shows the 'IP to Tel Calls Count' page.
SIP User's Manual
menu allows you to monitor real-time activity such as IP
Viewing Call Counters''
Viewing Call Routing Status''
Viewing IP Connectivity''
The Web pages pertaining to the Gateway Statistics menu do not refresh
automatically. To view updated information, close the relevant page and then
re-access it.
button located on the page.
Figure 3-134: Calls Count Page
on page
on page
on page
214
Mediant 600 & Mediant 1000
214 )
214 )
on page 217 )
219 )
page
Document #: LTRT-83306