Status & Diagnostics; Gateway Statistics; Ip Connectivity; Figure 5-36: Ip Connectivity Screen - AudioCodes MediaPack MP-102 User Manual

5.10 Status & Diagnostics
Use this subdivided menu to view and monitor the gateway's channels, Syslog messages,
hardware / software product information, and to assess the gateway's statistics and IP
connectivity information.

5.10.1 Gateway Statistics

Use the screens under Gateway Statistics to monitor real-time activity such as IP Connectivity
information, call details and call statistics, including the number of call attempts, failed calls, fax
calls, etc.
Note: The Gateway Statistics screens doesn't refresh automatically. To view updated information
re-access the screen you require.

5.10.1.1 IP Connectivity

The IP Connectivity screen provides you with an online read-only network diagnostic connectivity
information on all destination IP addresses configured in the Tel to IP Routing table.
Note: This information is available only if the parameter 'AltRoutingTel2IPEnable' (described in
Table 5-10) is set to 1 (Enable) or 2 (Status Only).
Note:
To view the IP connectivity information, take these 2 steps:
Set 'AltRoutingTel2IPEnable' to 1 or 2.
1.
Open the 'IP Connectivity' screen (Status & Diagnostics menu > Gateway Statistics
2.
submenu > IP Connectivity); the 'IP Connectivity' screen is displayed
MP-1xx SIP User's Manual
The information in columns 'Quality Status' and 'Quality Info.' (per IP
address) is reset if two minutes elapse without a call to that destination.

Figure 5-36: IP Connectivity Screen

124
MP-1xx SIP
(Figure 5-36).
Document #: LTRT-65404