Concluding Steps - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

9.5.6.6

Concluding steps

Ê Perform the following procedures:
1. "Closing the server" on page 66
2. "Installing the server in the rack" on page 68
3. "Updating RAID controller firmware" on page 84
4. "Enabling SVOM boot watchdog functionality" on page 89
5. "Switching on the server" on page 72
6. "Closing the rack door" on page 73
RX100 S7
Upgrade and Maintenance Manual
Expansion cards and backup units
267