Removing The Defective Power Cable - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Cables

16.5.3 Removing the defective power cable

Figure 284: Disconnecting the power cable from the SAS/SATA backplane
Ê Disconnect the power cable from the SAS/SATA backplane.
Figure 285: Disconnecting the power cable from the system board
Ê Disconnect the power cable from the system board.
Ê Remove the power cable from the cable clamp (see circle).
Ê Thread the cable through the recess (see circle) and remove the power
cable.
404 Upgrade and Maintenance Manual
RX100 S7