Removing The Retaining Spring From The Odd; Removing The Odd - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Optical disk drive

12.3.4 Removing the ODD

Figure 201: Removing the ODD
Ê Press the retaining spring in direction of the arrow until it disengages (1).
Ê Push the ODD out of the bay (2).

12.3.5 Removing the retaining spring from the ODD

Figure 202: Removing the retaining spring from the ODD
Ê Remove the two screws (see circles).
Ê Remove the retaining spring.
304 Upgrade and Maintenance Manual
RX100 S7