Basic hardware procedures
4.6
Closing the server
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
The top cover must be replaced as soon as possible for purposes of
●
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
Follow the safety instructions in chapter
●
page
43.
Figure 8: Attaching the top cover
Ê Place the top cover on the server (1).
Make sure that each bolt is positioned in the corresponding nut.
Ê Push the top cover as far as it will go in the direction of the arrow (2).
66
Upgrade and Maintenance Manual
"Important information" on
RX100 S7