Replacing Tfm; Required Tools; Preliminary Steps; Removing The Defective Tfm - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

9.4.7

Replacing TFM

Upgrade and Repair Units (URU)
Average task duration: 10 minutes
9.4.7.1

Required tools

Preliminary and concluding steps: tool-less
●
Main steps: Phillips PH1 / (+) No.1 screw driver
●
9.4.7.2

Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Shutting down the server" on page 59
4. "Extending/removing the server from the rack" on page 60
5. "Opening the server" on page 64
6. "Locating the defective component" on page 58
9.4.7.3

Removing the defective TFM

Ê Remove the depending expansion card as described in section
cards and riser modules" on page
Ê Disconnect the FBU adapater cable as described in section
the FBU adapter cable from the TFM" on page
RX100 S7
199.
Upgrade and Maintenance Manual
Expansion cards and backup units
256.
"Expansion
"Disconnecting
225