Installing The Heat Sink - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Processor

11.2.10 Installing the heat sink

Figure 191: Installing the heat sink
Ê Align the heat sink and fit it on the processor socket.
Ê Position the screws in the holes carefully, making sure they are upright.
Ê Fasten it in a crossover pattern with four screws according to the numbering
(torque 6.0 Nm, the description of this torque value doesn't apply to the
Japanese market.)
290 Upgrade and Maintenance Manual
RX100 S7