Installing An Sfp+ Transceiver Module; Installing The Protective Optical Port Plug - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 110: Removing the SFP+ transceiver module
Ê Pull the SFP+ transceiver module out of its socket connector.
9.3.2.4

Installing the protective optical port plug

Ê Attach the protective optical port plug to the transceiver optical bores.
I
Place the removed SFP+ transceiver module in an antistatic bag or
other protective environment.
9.3.2.5

Installing an SFP+ transceiver module

Ê Perform the following procedure to install an SFP+ transceiver module:
– "Installing SFP+ transceiver modules" on page 191
198 Upgrade and Maintenance Manual
RX100 S7