Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual page 397

Figure 276: Inserting the fan/ODD power cable in the cable clamps
Ê Insert the fan/ODD power cable in the cable clamps.
Ê Route the fan/ODD power cable as before.
Figure 277: Installing the fan module
Ê Install all fan modules:
Ê Thread the fan cable through the opening of the fan cage toward the front
side and insert the fan module.
Ê Press down the four rubber pins (A), until they engage.
RX100 S7
A
A
Upgrade and Maintenance Manual
A
A
Cables
397