Fujitsu Primergy RX100 S5 Start Manual

�����������
����������������������������������������������
��������������������������������������������������
��������������������������������������������������������������������
���������������������������������������������������������
SATA hard disk unit
n
This server has a model with a SATA hard disk installed. The SATA hard disk is designed to be used about eight hours per day
for five years with small scale and comparatively low access frequency. Refrain from using for mission-critical tasks in which
continuous 24/7/365 operation is necessary, or database in which the access is frequently repeated, and high reliability is re-
quired.
To prevent the loss of important data, regular data backup is recommended.
PRIMERGY RX100 S5 Manuals
n
Manuals for this server are stored in the PRIMERGY Startup Disc.
Insert the PRIMERGY Startup Disc and click [PRIMERGY Manuals] on the [PRIMERGY Startup Disc] screen to refer to the
manuals.
The manuals can be read using Acrobat
later.
1
Checking the items
supplied
Check the contents in the package using the
"Contents List". If any items are missing, contact
an office listed in the "Contact Information".
3

Installing internal options

If internal options have been purchased separately, install them before installing the Operating System.
In the following case, do not install the internal options
before the OS has been installed.
- Custom Made Service
When installing internal options, perform operations after
reading the following manuals.
������������ "Chapter 6 Installing Internal Options"
"PRIMERGY ServerBooks"/Supplement"
���������������
Install the following option devices after installing the OS.
Installing the OS after option devices have been installed
will cause the installation operation to end in an error.
- Non-system hard disks
- Internal SCSI optional devices (Backup cabinet, etc.)
RX100 S5
Reader or Adobe Reader
® ® ®
1
When using Acrobat
®. ®
2
Reading and understand-
ing "Safety Precautions"
Before using this server, be sure to read and un-
derstand the attached "Safety Precautions".
Also check it when connecting, installing internal options
and setting up this server.
n Available internal options and
installation locations
������
�������
�����������������
�����
�����������������������
After installing internal options, check that the installation
order and location are correct and cables are correctly
connected.
B7FH-5131-01EN-00
Reader , use version 5.0 or
®
����������
�����