Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual page 449

Managem.
LAN
Shared
LAN
COM1
VGA
Riser card (x1)
Riser card (x4)
USB1/2
Standard
LAN
USB3/4
UFM
Figure 341: Indicators on the system board and CSS indicate button
No. Description
1 CSS indicate button
LEDs A, B and C are visible from outside on the rear of the server. All the other
LEDs are only visible, if the cover of the server has been opened.
If the server has been powered off (power-plugs must be disconnected) it is
possible to indicate the faulty component by pressing the CSS indicate button.
RX100 S7
Riser card (x16)
Slot3
TPM
iRMC S3
Slot2
Slot1
PCH
Upgrade and Maintenance Manual
PCIE16
PWR2
BP PWR
FRONT LAN
BP SGPIO
Battery
DIMM2A
DIMM1A
DIMM2B
DIMM1B
Reset (PIN1),
GND (PIN2)
J22
FRONT VGA FRONT PANEL
J26
Appendix
PWR1
CPU
FAN2
Indicate
CSS
CSS
FAN SYS
449