Preliminary Steps; Removing The Riser Module 1 - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

11.2.2 Preliminary steps

Ê Perform the following procedures:
1. "Opening the rack door" on page 59
2. "Locating the defective server" on page 55
3. "Disabling SVOM boot watchdog functionality" on page 76
4. "Disabling BitLocker functionality" on page 75
5. "Shutting down the server" on page 59
6. "Extending/removing the server from the rack" on page 60
7. "Opening the server" on page 64

11.2.3 Removing the riser module 1

Figure 181: Removing the riser module 1
Ê Carefully pull out the riser module 1 upward.
RX100 S7
Upgrade and Maintenance Manual
Processor
281