Installing The New Sata Cable - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Cables
Figure 281: Disconnecting the SATA cable from the system board
Ê Disconnect the SATA cable from the system board.
Ê Remove the SATA cable.

16.4.4 Installing the new SATA cable

Figure 282: Connecting the SATA cable to the system board
Ê Connect the SATA cable to the connector "SATA5-ODD" on the system
board.
Ê Route the SATA cable as shown in the figure.
Upgrade and Maintenance Manual 401
RX100 S7