Disconnecting The Power Cables - Fujitsu PRIMERGY RX100 S7 Upgrade And Maintenance Manual

Power supply
Ê Push the lock in direction of the arrow (2).
Ê Grip the handle and pull out the power supply module in the direction of the
arrow (3).
Ê If a second power supply module has been installed, remove this one in the
same way.
6.3.3.5

Disconnecting the power cables

Figure 52: Disconnecting the power cables
Ê Disconnect the two power cables from the power distribution board.
132 Upgrade and Maintenance Manual
RX100 S7